A-Leftsideview1.jpg (1 of 37)

I bought this wrecked 1998 ST because my bike's rear brake rotor was worn. I'm keeping the rear wheel assembly and shock absorber and parting out the rest. The bike had been stored in the owner's garage for the three years since its crash. The rear part of the frame is bent and most of the plastic was pulverized. But mechanically, everything seems in order. After I installed the ignition control module and battery from my 1991 ST1100 (plus rigged up a fresh fuel supply), it started with little cranking. I then cleaned out the carb jets and the fuel tank, and the bike starts and runs smoothly. Now I need to check out the straightness of the forks and front wheel and brake rotors before I list them for sale.

If you know someone who might want parts from a bike with less than 6,600 miles on it, send them to me!