Custom Search
check out more here: MeanStang08 YouTube Channel
Vote For me Contestant Entry here - Shell Gasoline with N2
Ride down Searcy Curves on State Road #36 crappy cell-phone video:
Sequential Taillights and then 3 of the 9 dyno runs/pull videos (new videos w/new cam coming soon):
Ordered March 2008 - everything but DVD/Navigation 
2.7 miles on her STOCK
I've done all the work myself short of some big ticket items i had painted (although i've painted quite a bit) and the 4.10 rear end gears from a FRPP installation shop for the warranty (but i helped)
Dark Candy Apple Red w/ black on black interior - leather
Roush 3 piece Matte Black Rear Spoiler
Roush Aluminum Matte Black Rear Window Louvers (hinge up with prop-rods for cleaning window)
Roush 1/4 Window Louvers (dca red)
3DCarbon 1/4 Scoops (dca red)
CDC classic Chin spoiler
Shorty antenna & Shaker 1000 sound system - my color inside
Matte black antenna flame surround - which will be changing
Front Turn Signal black / clear outs Window Tint - 35%/20%
Sequential taillights (see my video)
skull Xbones over GT in faux gascap
Painted Hoodscoop (matte black)
painted rear trunk panel (between taillights) - matte black
the keyless entry is a remote (like the key-fob) and it comes with a cover that is paintable (primered) or you can keep the black one on that is textured to match the car trim - they're from FORD - factory accessory - i bought mine off of e-bay saved 100$ though even though it was still like $90 - they're programmable just like the key-fob as long as you have one of the original key-fobs it has DBL sided tape that you stick it on with. bad note - if the battery goes bad, you gotta get another - it's not replaceable.
Black NXT Generation hood lift struts - prop rod delete
Midwest Autogear Radiator Cover + Radiator Cover Extensions + prop rod plug (dca red)
Midwest Autogear 4.6 shock tower covers (dca red)
Midwest Autogear fuse box cover (dca red) + 4.6 billet emblem
Custom one-off (dca red) and mustang logo gas cap oil fill cap I made
Billet T handle for dipstick
C&L Performance Intake
SCT X3 tuner
Custom Tunes from www.Bamachips.com 93 race, 89 torque, 87 performance - shes never had anything but 93 octane in her, and i tend to keep the 93 race tune active, which LOVES cold take-offs
Magnaflow 3" aggressive catback 16674 exhaust with 4" tips + PYPES offroad X pipe
Hurst Billet Pro/Comp Short throw shifter 3915201
Custom "HAM" handmade cast aluminum skull shifter knob (i dca red & clearcoated the eyes)
Custom Dash Plaque - Engine bay tags i drew & had printed - I even drew them their logo - www.UniqueAutoSupplies.com
Steeda billet aluminum pedals + dead pedal
Cup holder - billet aluminum delete
Beltronics Vector FX2 - accelerometer / g-meter
FRPP 4.10 Rear End 8.8 gears
Skull / flames "eye candy" embroidered in the head rests & floor mats (drawn by me)
Custom personalized KY liscense plates - EYE CDY
George Trosley's rendition: 
At a year and only 1,856 miles she's not a daily driver, but she's not just a show-queen, I'm not afraid to lay down a patch of rubber, and drive her like I stole her…
Signs I made up for car shows:
if you want this image a specific color - PM me and i'll make you one that you can print & laminate
at the Kentucky Kruizers show at point park
I got to take 4 laps at the Kentucky Speedway with my wife Lori:
Here's a list of future mods that I have already purchased and are sitting in my spare bedroom waiting for this summer when the weather breaks and I can install them. Right now, while the weather stinks, I'm customizing a Revell 1/25th scale Model Kit to look like my baby... including spoilers, scoops, louvers and numerous other details.
info on the model - i had to end up putting like 4 different models together, first you need a Revell 1/25th scale 2006 GT model, then my rims and CAI are from a Revell 2006 GT-H Shelby model and the rear louvers i had to hand make from 2 sets of 1970 Boss 429 models (they weren't wide enough) the rear spoiler, hood & scoop, 1/4 window louvers, chin spoiler are from a guy i found on the net - http://shop.psfhobbies.com/main.sc and the paint is actual car paint & clearcoat i bought from www.paintscratch.com the exhaust is .25" aluminum tubing i cut-up, and then drew a mini liscense plate and printed it in color & laminated it. just get some good very fine paint brushes and a TESTOR engine detail paint kit (flat blacks, other colors)
CPC NXT Generation Fuel Rail Covers matching my factory plentumcover
Scott Drake E-brake handle Billet Aluminum Cover just installed 
Chrome 5lb ABC fire extinguisher - ford logo w/flames embossed
CPC NXT Generation plentum cover extension
Custom Door Sil plates (Eye Candy Logo Theme) have arrived & will be installed soon, stay tuned for pictures of the install!! w00t!!! 
Hurst Line Lock Roll Control kit
UPRproducts Black plain - no logo Billet Gas fill cover
CPC NXT Generartion battery cover and master cyl cover
UPR eibach 2" Lowering springs
GT fender badge swap (Custom CNC'd Billet Powered by Ford - Dark Candy Apple Red inlayed) installed 3.17.09
Hood scoop billet grille changeout - which way do you think i should go? billet or no billet? i haven't installed it yet, I just put it up there to see what it'd look like.. what do you think? do you think it would look okay without changing the main grill and lower grill or do those need to be changed too?
Billet Cap accessories - Radiator overflow, washer fluid, master cyl, pwr steering, Idle Air Ctrl Sleeve
I will be painting the radiaor overflow top (black part) Dark Candy Apple Red to match the car
I am going to attempt to paint the door window control panels Dark Candy Apple Red too (i bought extra sets of these to paint, just in case i screw up)
Custom Painted Valve covers for the 4.6L 3v V8 - (just got my extra covers in the mail)
concept photo:
Kenne Bell 2.6L supercharger which I'm hoping for around 500hp to the rear wheels.
a billion more pics of all the transformation and stuffs here: http://photobucket.com/meanstang08
>page 1 - you are here...
Come Back soon & often!
